MEDIA_ENT_F_UNKNOWN and
MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN |
Unknown entity. That generally indicates that a driver didn't
initialize properly the entity, which is a Kernel bug |
MEDIA_ENT_F_IO_V4L |
Data streaming input and/or output entity. |
MEDIA_ENT_F_IO_VBI |
V4L VBI streaming input or output entity |
MEDIA_ENT_F_IO_SWRADIO |
V4L Software Digital Radio (SDR) streaming input or output entity |
MEDIA_ENT_F_IO_DTV |
DVB Digital TV streaming input or output entity |
MEDIA_ENT_F_DTV_DEMOD |
Digital TV demodulator entity. |
MEDIA_ENT_F_TS_DEMUX |
MPEG Transport stream demux entity. Could be implemented on
hardware or in Kernelspace by the Linux DVB subsystem. |
MEDIA_ENT_F_DTV_CA |
Digital TV Conditional Access module (CAM) entity |
MEDIA_ENT_F_DTV_NET_DECAP |
Digital TV network ULE/MLE desencapsulation entity. Could be
implemented on hardware or in Kernelspace |
MEDIA_ENT_F_CONN_RF |
Connector for a Radio Frequency (RF) signal. |
MEDIA_ENT_F_CONN_SVIDEO |
Connector for a S-Video signal. |
MEDIA_ENT_F_CONN_COMPOSITE |
Connector for a RGB composite signal. |
MEDIA_ENT_F_CAM_SENSOR |
Camera video sensor entity. |
MEDIA_ENT_F_FLASH |
Flash controller entity. |
MEDIA_ENT_F_LENS |
Lens controller entity. |
MEDIA_ENT_F_ATV_DECODER |
Analog video decoder, the basic function of the video decoder is
to accept analogue video from a wide variety of sources such as
broadcast, DVD players, cameras and video cassette recorders, in
either NTSC, PAL, SECAM or HD format, separating the stream into
its component parts, luminance and chrominance, and output it in
some digital video standard, with appropriate timing signals. |
MEDIA_ENT_F_TUNER |
Digital TV, analog TV, radio and/or software radio tuner, with
consists on a PLL tuning stage that converts radio frequency (RF)
signal into an Intermediate Frequency (IF). Modern tuners have
internally IF-PLL decoders for audio and video, but older models
have those stages implemented on separate entities. |
MEDIA_ENT_F_IF_VID_DECODER |
IF-PLL video decoder. It receives the IF from a PLL and decodes
the analog TV video signal. This is commonly found on some very
old analog tuners, like Philips MK3 designs. They all contain a
tda9887 (or some software compatible similar chip, like tda9885).
Those devices use a different I2C address than the tuner PLL. |
MEDIA_ENT_F_IF_AUD_DECODER |
IF-PLL sound decoder. It receives the IF from a PLL and decodes
the analog TV audio signal. This is commonly found on some very
old analog hardware, like Micronas msp3400, Philips tda9840,
tda985x, etc. Those devices use a different I2C address than the
tuner PLL and should be controlled together with the IF-PLL video
decoder. |
MEDIA_ENT_F_AUDIO_CAPTURE |
Audio Capture Function Entity. |
MEDIA_ENT_F_AUDIO_PLAYBACK |
Audio Playback Function Entity. |
MEDIA_ENT_F_AUDIO_MIXER |
Audio Mixer Function Entity. |
MEDIA_ENT_F_PROC_VIDEO_COMPOSER |
Video composer (blender). An entity capable of video
composing must have at least two sink pads and one source
pad, and composes input video frames onto output video
frames. Composition can be performed using alpha blending,
color keying, raster operations (ROP), stitching or any other
means. |
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER |
Video pixel formatter. An entity capable of pixel formatting
must have at least one sink pad and one source pad. Read
pixel formatters read pixels from memory and perform a subset
of unpacking, cropping, color keying, alpha multiplication
and pixel encoding conversion. Write pixel formatters perform
a subset of dithering, pixel encoding conversion and packing
and write pixels to memory. |
MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV |
Video pixel encoding converter. An entity capable of pixel
encoding conversion must have at least one sink pad and one
source pad, and convert the encoding of pixels received on
its sink pad(s) to a different encoding output on its source
pad(s). Pixel encoding conversion includes but isn't limited
to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB
conversions. |
MEDIA_ENT_F_PROC_VIDEO_LUT |
Video look-up table. An entity capable of video lookup table
processing must have one sink pad and one source pad. It uses
the values of the pixels received on its sink pad to look up
entries in internal tables and output them on its source pad.
The lookup processing can be performed on all components
separately or combine them for multi-dimensional table
lookups. |
MEDIA_ENT_F_PROC_VIDEO_SCALER |
Video scaler. An entity capable of video scaling must have
at least one sink pad and one source pad, and scale the
video frame(s) received on its sink pad(s) to a different
resolution output on its source pad(s). The range of
supported scaling ratios is entity-specific and can differ
between the horizontal and vertical directions (in particular
scaling can be supported in one direction only). Binning and
sub-sampling (occasionally also referred to as skipping) are
considered as scaling. |
MEDIA_ENT_F_PROC_VIDEO_STATISTICS |
Video statistics computation (histogram, 3A, etc.). An entity
capable of statistics computation must have one sink pad and
one source pad. It computes statistics over the frames
received on its sink pad and outputs the statistics data on
its source pad. |
MEDIA_ENT_F_PROC_VIDEO_ENCODER |
Video (MPEG, HEVC, VPx, etc.) encoder. An entity capable of
compressing video frames. Must have one sink pad and at least
one source pad. |
MEDIA_ENT_F_PROC_VIDEO_DECODER |
Video (MPEG, HEVC, VPx, etc.) decoder. An entity capable of
decompressing a compressed video stream into uncompressed video
frames. Must have one sink pad and at least one source pad. |
MEDIA_ENT_F_VID_MUX |
Video multiplexer. An entity capable of multiplexing must have at
least two sink pads and one source pad, and must pass the video
frame(s) received from the active sink pad to the source pad. |
MEDIA_ENT_F_VID_IF_BRIDGE |
Video interface bridge. A video interface bridge entity must have at
least one sink pad and at least one source pad. It receives video
frames on its sink pad from an input video bus of one type (HDMI, eDP,
MIPI CSI-2, etc.), and outputs them on its source pad to an output
video bus of another type (eDP, MIPI CSI-2, parallel, etc.). |
MEDIA_ENT_F_DV_DECODER |
Digital video decoder. The basic function of the video decoder is
to accept digital video from a wide variety of sources
and output it in some digital video standard, with appropriate
timing signals. |
MEDIA_ENT_F_DV_ENCODER |
Digital video encoder. The basic function of the video encoder is
to accept digital video from some digital video standard with
appropriate timing signals (usually a parallel video bus with sync
signals) and output this to a digital video output connector such
as HDMI or DisplayPort. |