4.9. RDS Interface¶
The Radio Data System transmits supplementary information in binary format, for example the station name or travel information, on an inaudible audio subcarrier of a radio program. This interface is aimed at devices capable of receiving and/or transmitting RDS information.
For more information see the core RDS standard IEC 62106 and the RBDS standard NRSC-4-B.
Note
Note that the RBDS standard as is used in the USA is almost identical to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the fields have slightly different meanings. See the RBDS standard for more information.
The RBDS standard also specifies support for MMBS (Modified Mobile Search). This is a proprietary format which seems to be discontinued. The RDS interface does not support this format. Should support for MMBS (or the so-called 'E blocks' in general) be needed, then please contact the linux-media mailing list: https://linuxtv.org/lists.php.
4.9.1. Querying Capabilities¶
Devices supporting the RDS capturing API set the
V4L2_CAP_RDS_CAPTURE
flag in the capabilities
field of struct
v4l2_capability
returned by the
ioctl VIDIOC_QUERYCAP ioctl. Any tuner that
supports RDS will set the V4L2_TUNER_CAP_RDS
flag in the
capability
field of struct v4l2_tuner
. If the
driver only passes RDS blocks without interpreting the data the
V4L2_TUNER_CAP_RDS_BLOCK_IO
flag has to be set, see
Reading RDS data. For future use the flag
V4L2_TUNER_CAP_RDS_CONTROLS
has also been defined. However, a driver
for a radio tuner with this capability does not yet exist, so if you are
planning to write such a driver you should discuss this on the
linux-media mailing list:
https://linuxtv.org/lists.php.
Whether an RDS signal is present can be detected by looking at the
rxsubchans
field of struct v4l2_tuner
: the
V4L2_TUNER_SUB_RDS
will be set if RDS data was detected.
Devices supporting the RDS output API set the V4L2_CAP_RDS_OUTPUT
flag in the capabilities
field of struct
v4l2_capability
returned by the
ioctl VIDIOC_QUERYCAP ioctl. Any modulator that
supports RDS will set the V4L2_TUNER_CAP_RDS
flag in the
capability
field of struct
v4l2_modulator
. In order to enable the RDS
transmission one must set the V4L2_TUNER_SUB_RDS
bit in the
txsubchans
field of struct
v4l2_modulator
. If the driver only passes RDS
blocks without interpreting the data the V4L2_TUNER_CAP_RDS_BLOCK_IO
flag has to be set. If the tuner is capable of handling RDS entities
like program identification codes and radio text, the flag
V4L2_TUNER_CAP_RDS_CONTROLS
should be set, see
Writing RDS data and
FM Transmitter Control Reference.
4.9.2. Reading RDS data¶
RDS data can be read from the radio device with the read() function. The data is packed in groups of three bytes.
4.9.3. Writing RDS data¶
RDS data can be written to the radio device with the write() function. The data is packed in groups of three bytes, as follows:
4.9.4. RDS datastructures¶
-
v4l2_rds_data
¶
__u8 | lsb |
Least Significant Byte of RDS Block |
__u8 | msb |
Most Significant Byte of RDS Block |
__u8 | block |
Block description |
Bits 0-2 | Block (aka offset) of the received data. |
Bits 3-5 | Deprecated. Currently identical to bits 0-2. Do not use these bits. |
Bit 6 | Corrected bit. Indicates that an error was corrected for this data block. |
Bit 7 | Error bit. Indicates that an uncorrectable error occurred during reception of this block. |
V4L2_RDS_BLOCK_MSK | 7 | Mask for bits 0-2 to get the block ID. | |
V4L2_RDS_BLOCK_A | 0 | Block A. | |
V4L2_RDS_BLOCK_B | 1 | Block B. | |
V4L2_RDS_BLOCK_C | 2 | Block C. | |
V4L2_RDS_BLOCK_D | 3 | Block D. | |
V4L2_RDS_BLOCK_C_ALT | 4 | Block C'. | |
V4L2_RDS_BLOCK_INVALID | read-only | 7 | An invalid block. |
V4L2_RDS_BLOCK_CORRECTED | read-only | 0x40 | A bit error was detected but corrected. |
V4L2_RDS_BLOCK_ERROR | read-only | 0x80 | An uncorrectable error occurred. |