Kernel driver corsair-cpro¶
- Corsair Commander Pro
- Corsair Commander Pro (1000D)
Author: Marius Zachmann
This driver implements the sysfs interface for the Corsair Commander Pro. The Corsair Commander Pro is a USB device with 6 fan connectors, 4 temperature sensor connectors and 2 Corsair LED connectors. It can read the voltage levels on the SATA power connector.
Since it is a USB device, hotswapping is possible. The device is autodetected.
|in0_input||Voltage on SATA 12v|
|in1_input||Voltage on SATA 5v|
|in2_input||Voltage on SATA 3.3v|
|temp[1-4]_input||Temperature on connected temperature sensors|
|fan[1-6]_input||Connected fan rpm.|
|fan[1-6]_label||Shows fan type as detected by the device.|
|fan[1-6]_target||Sets fan speed target rpm. When reading, it reports the last value if it was set by the driver. Otherwise returns an error.|
|pwm[1-6]||Sets the fan speed. Values from 0-255. Can only be read if pwm was set directly.|