Kernel driver isl28022¶
Supported chips:
Renesas ISL28022
Prefix: ‘isl28022’
Addresses scanned: none
Datasheet: Publicly available at the Renesas website
- Author:
Carsten Spieß <mail@carsten-spiess.de>
Description¶
The ISL28022 is a power monitor with I2C interface. The device monitors voltage, current via shunt resistor and calculated power.
Usage Notes¶
This driver does not auto-detect devices. You will have to instantiate the device explicitly. Please see How to instantiate I2C devices for details.
The shunt value in micro-ohms, shunt voltage range and averaging can be set with device properties. Please refer to the Documentation/devicetree/bindings/hwmon/isl,isl28022.yaml for bindings if the device tree is used.
The driver supports only shunt and bus continuous ADC mode at 15bit resolution. Averaging can be set from 1 to 128 samples (power of 2) on both channels. Shunt voltage range of 40, 80, 160 or 320mV is allowed The bus voltage range is 60V fixed.
Sysfs entries¶
The following attributes are supported. All attributes are read-only.
in0_input |
bus voltage (milli Volt) |
curr1_input |
current (milli Ampere) |
power1_input |
power (micro Watt) |
Debugfs entries¶
The following attributes are supported. All attributes are read-only.
shunt_voltage |
shunt voltage (micro Volt) |